Description

Sunsun Canister Filter HW-402B | Aquanature Online

OPERATION GUIDE
To set your filter up,the buckles (1)and(2) should be unclipped from the main body of the filter head this will then separate the head from the base of the filter
You can then access your filter trays to be clean the filter media or add filter media

Filter Media is not a part of Standard Package.
Repeat step one to refasten the filter head to the base of the filter
Push the inlet and outlet taps into the filter head and fasten using the small handle in between the taps this is also the shut of valve

After this attach your hose to each tap and secure using the screw caps
According to the diagram then attach the input downpipes and output spraybars
According to the diagram then press down the blue primer button on top of the filter head this will prime the filter drawing water in through the hose
Repeat this if necessary until all pipeworks is full with water
The switch to (3)turn your UV and indicator on and off is located in the side of the filter head
Please check the UV regularly when cleaning your filter to make sure it is in full working order
At any condition,when the barrel is separated by the cover,the protect switch will be off
Then the UV will be extinguish to avoid the damage to body

Filter Media is not a part of Standard Package.

Canister filters are very easy to install and maintain.

You need not clean this as frequent as you clean the Top filter or internal filters.

Frequent opening and closing might damage the O ring or otherwise known as Gasket

• Good for up to 75 gallon fish tanks
• Dimension: 9″ L X 9″ W X 15.5″ H
• Flow rate: 265 GPH (1000L/hr)
• Pump Power: 18W
• Built in 9 Watt UV sterilizer for controlling algae spores/bacteria and promoting clear water.
• On/Off switch for UV Lamp
• 3 Media trays capable of handling your choice of filtration media
• Dimensions: 13″ x 9.8″ x 16″
• Weight: 5025 g